Each Gang Sheet has high quality and vibrant transfers that will take your crafts to the next level!
Each Gang Sheet comes with:
5-6 Designs
Most Gang Sheets are made for Adult Shirt sizes unless stated otherwise
Instructions:
Please Note: A Heat Press is required for these transfers. While a Cricut Handpress or Iron “will work”; We highly recommend a heat press for the smoothest quality. We are not responsible for any damages caused by an iron or easy press, so please use at your own risk.
325F for 5-10 seconds using medium to heavy pressure.
Hot Peel
We recommend doing a 2 second hot press using parchment paper over the top after cold peel for added adhesion to surface.
Share
Pressing Instructions
Pre-Press the Garment: Remove any moisture from the garment by pre-pressing for 10 seconds at a lower temperature (e.g., 285°F).
Place the Transfer: Align the DTF transfer on the garment with the image side down.
Initial Press: Set your heat press to 325°F and apply heavy pressure for 8-10 seconds.
Peel: After 3-5 Second Peel the transfer film in one smooth, diagonal motion.
Final Press (Optional): Re-press the transfer with a parchment paper (for matte finish) or Teflon sheet (for gloss finish) for 5-10 seconds at the same temperature to help cure and lock in the design.
Wait 24 Hours: Avoid washing or stretching the garment for at least 24 hours to allow the print to fully cure
